Vertical machining center – VF | Strojírna Tyc. s.r.o.

The compact three-axis vertical machining center with movable headstock and crosswise movable table. The machine is equipped with a control system that works in three axes – X (lateral movement of table), Y (longitudinal movement of the slide and the table) a Z (vertical movement of spindle).

Enquiry

Do you have questions or need advice from us?? Contact form

Basic parametres of the machine

TYPE VF		800	1000	1200	1400	1600	2000
Length of table	mm	910	1 000	1 220	1 500	1 700	2 100
Width of table	mm	500	560	620	800	850	850
Load of table	kg	500	750	1 000	1 600	2 000	3 000
Stroke of X-axis	mm	800	1 020	1 200	1 400	1 600	2 000
Stroke of Y-axis	mm	500	560	600	800	900	900
Stroke of Z-axis	mm	540	600	675	740	800	800
Feeds X,Y,Z	m/min	0,001 – 10	0,001 – 10	0,001 – 10	0,001 – 8	0,001 – 8	0,001 – 8
Rapids feed X,Y/Z	m/min	24 / 20	24 / 18	24 / 18	20 / 18	20 / 15	20 / 15
Input of the machine	kVA	15	25	35	40	45	45
Built-up area	mm	2 100×2 600	2 500×2 800	3 000×2 800	3 500×4 300	3 900×4 400	4 800×4 400
Max. machine height	mm	2 500	2 600	2 800	3 200	3 300	3 300
Weight machine	kg	5 300	7 000	9 000	13 000	19 000	21 000

Basic headstock

TYPE VF		800	1000	1200	1400	1600	2000
Designation of headstock	–	VM-8/48	VM-8/48	VM-8/70	VM-8/95	VM-6/120	VM-6/120
Max. spindle power	kW	7,5	7,5	11	15	15	15
Max. torgue	Nm	48	48	70	95	120	120
Max. speed	rpm	8 000	8 000	8 000	8 000	6 000	6 000
Nominal speed	rpm	1 500	1 500	1 500	1 500	1 500	1 500
Clamping taper	–	ISO 40	ISO 40	ISO 40	ISO 40	ISO 50	ISO 50

Optional headstock

TYPE OF HEADSTOCK		SPEED	ZF	POWER
Designation of headstock	–	VE-18/63	VM-6/250	VM-8/400
Type of headstock	kW	vertical electrospindle	vertical spindle with spindle drive through ZF gearbox (i=2)	vertical spindle with spindle drive through ZF gearbox (i=4)
Max. power (S1/S6)	kW	28 / 28	15 / 24	27 / 45
Max. torgue (S1/S6)	Nm	63 / 96	250 / 320	400 / 250
Max. speed	rpm	18 000	6 000	8 000
Nominal speed	ot/min	4 200	570	650
Clamping taper	–	HSK 63	ISO 50	ISO 50